Marine Accessories

  • Fox40 Whistle Classic

    Fox40 Whistle Classic


    $6.00
    x

    Fox40 Whistle Classic

    $6.00 Booyah!

        A whistle is a must-have for most packs, no matter the adventure you're on. The Fox40 pealess whistle's 3-chambered design will self-clear when submerged in water, which means you can feel prepared heading out on a variety of activities from hiking to paddling.

        This is a reliable piece of safey equipement with no moving parts to worry about freezing, jamming or deteriorating -- you can rely on this little guy to get attention for sure!

    Sound power: 115 dB

  • Fiber-Tek Gelcoat (white, 250ml)

    Fiber-Tek Gelcoat (white, 250ml)


    $23.00
    x
    Fiber-Tek Gelcoat (white, 250ml)

    Fiber-Tek Gelcoat (white, 250ml)

    $23.00 Booyah!

    An isophthalic resin based surface coating for use on fiberglass laminate.  Requires methyl ethyl ketone peroxide (MEKP) catalyst which is included.  Simply clean and sand the area you wish to apply gelcoat on, mix the catalyst with the gelcoat, and brush on.

  • North Water Vinyl Tec 2000 (100ml)

    North Water Vinyl Tec 2000 (100ml)


    $25.00
    x
    North Water Vinyl Tec 2000 (100ml)

    North Water Vinyl Tec 2000 (100ml)

    $25.00 Booyah!

    This super strong one-step industrial strength adhesive creates a chemical bond between vinyl anchors and royalex, kevlar and fiberglass boats.  No mixing required, this stuff allows you a lot of set up time and dries clear.  Great for vinyl air bag and raft repairs.

    Approximate coverage is 2000 sq cm per 100ml. 

  • North Water Vinyl Tec 2000 (500ml)

    North Water Vinyl Tec 2000 (500ml)


    $58.00
    x
    North Water Vinyl Tec 2000 (500ml)

    North Water Vinyl Tec 2000 (500ml)

    $58.00 Booyah!

    This super strong one-step industrial strength adhesive creates a chemical bond between vinyl anchors and royalex, kevlar and fiberglass boats.  No mixing required, this stuff allows you a lot of set up time and dries clear.  Great for vinyl air bag and raft repairs.

    Approximate coverage is 2000 sq cm per 100ml. 

  • Quick Patch

    Quick Patch


    $29.00 - $94.00
    x

    Quick Patch

    $29.00 Booyah!

    A unique, light-activated fiberglass-reinforced polyester self-adhesive repair patch.  Just cut, peel, and stick - the patch has excellent adhesion.  It cures in about 10 minutes in UV light (sunlight, or a UV flashlight) and within an hour you can drill, tap, sand and paint it.  It doesn't shrink or expand during application or after curing, and bonds to all surfaces except polypropylene.  It's flexible and waterproof and the resulting patch is extremely durable.  Use it on canoes, paddle boards, jet skis, windows, pools, tanks, pipes, bumpers, exhaust leaks, windows, wood, concrete.... the possibilities are endless!

  • Sold Out
    303 Aerospace Protectant (296ml)

    303 Aerospace Protectant (296ml)


    $11.99
    x
    303 Aerospace Protectant (296ml)

    303 Aerospace Protectant (296ml)

    Sold Out
    $11.99

    With no harmful silicone oils, petroleum distillates or waxes, this environmentally safe UV treatment repels dirt, water spots and dust.  Works on vinyl, rubber, Hypalon, urethane, gelcoat, fiberglass, Lexan and sailcloth.  Finish is non oily.

  • 303 Aerospace Protectant (473ml)

    303 Aerospace Protectant (473ml)


    $19.00
    x
    303 Aerospace Protectant (473ml)

    303 Aerospace Protectant (473ml)

    $19.00 Booyah!

    With no harmful silicone oils, petroleum distillates or waxes, this environmentally safe UV treatment repels dirt, water spots and dust.  Works on vinyl, rubber, Hypalon, urethane, gelcoat, fiberglass, Lexan and sailcloth.  Finish is non oily.

     

  • Amazing Goop Marine Epoxy Paste (4oz)

    Amazing Goop Marine Epoxy Paste (4oz)


    $19.00
    x
    Amazing Goop Marine Epoxy Paste (4oz)

    Amazing Goop Marine Epoxy Paste (4oz)

    A fast drying, non-shrinking epoxy paste for emergency repairs.  It bonds permanently to metal, wood, fiberglass, and other materials.  Works great for filling holes and cracks.  When dry (this only takes 20 minutes) you can sand, drill, saw and paint it.  Doesn't sag so it works well for overhead jobs, and it's waterproof so you can actually apply the stuff underwater.

  • Armada Mighty Brite Mildew & Stain Remover (16oz)

    Armada Mighty Brite Mildew & Stain Remover (16oz)


    $25.99
    x
    Armada Mighty Brite Mildew & Stain Remover (16oz)

    Armada Mighty Brite Mildew & Stain Remover (16oz)

    $25.99 Booyah!

    A dry powder formula that works chemically to remove organic stains such as mildew, mold, blood, pet stains, wine, etc.  Works on vinyl, cloth, Sunbrella and canvas materials.  Safe on all colours, it won't damage the material even with repeated use.  Non-toxic and biodegradable.  Do not use on silk, leather or wool.

  • Interlux Antifouling Paint VC17M (750ml)

    Interlux Antifouling Paint VC17M (750ml)


    $94.00 - $96.00
    x
    Interlux Antifouling Paint VC17M (750ml)

    Interlux Antifouling Paint VC17M (750ml)

    The original antifouling with "non-stick" technology.  Metallic copper powder is added to VC17M's thin fluoro microadditive film to create a hard, super-smooth antifouling coating.  Its fluoro microadditive based film shrugs off marine growth, and the exceptional surface smoothness means boat speeds can actually increase by as much as 10%.

  • Interlux Brightside Paint (quart)

    Interlux Brightside Paint (quart)


    $58.00
    x
    Interlux Brightside Paint (quart)

    Interlux Brightside Paint (quart)

    A hard high gloss one-part polyurethane topside finish.  Use anywhere above the true waterline.  This stuff can go on with a paintbrush or roller yet look like it was sprayed.  It contains fluoro-micro additives for stain and abrasion resistance and is self leveling.  Use it on fiberglass, wood, aluminum or steel. 

    For best results, use a primer (such as Pre Kote).  One quart will cover about 137 square feet if applied by brush, 110 sqaure feet if sprayed.  It takes about 1-3 hours to dry to the touch and you can recoat in 8-16 hours.  Two coats are recommended. 

  • Interlux Brushing Liquid 333 (quart)

    Interlux Brushing Liquid 333 (quart)


    $25.00
    x
    Interlux Brushing Liquid 333 (quart)

    Interlux Brushing Liquid 333 (quart)

    This slow-drying solvent eases brushing and improves flow of one-part, top-side finishes, varnishes and antifoulings.  Extends drying time in hot weather.

  • Interlux Reducing Solvent 2333N (quart)

    Interlux Reducing Solvent 2333N (quart)


    $28.99
    x
    Interlux Reducing Solvent 2333N (quart)

    Interlux Reducing Solvent 2333N (quart)

    A slow evaporating solvent for use in specific two-part polyurethane and epoxy products.

  • Sold Out
    Interlux Solvent Wash 202 (quart)

    Interlux Solvent Wash 202 (quart)


    $25.00
    x
    Interlux Solvent Wash 202 (quart)

    Interlux Solvent Wash 202 (quart)

    Sold Out
    $25.00

    Used for the removal of mold release agents, wax, oil and grease from hulls of bare fiberglass boats.  It is necessary to use this before painting fiberglass gel coats regardless of age.  Also used to clean brushes.

  • Starbrite Boat Bottom Cleaner (32oz)

    Starbrite Boat Bottom Cleaner (32oz)


    $29.00
    x
    Starbrite Boat Bottom Cleaner (32oz)

    Starbrite Boat Bottom Cleaner (32oz)

    $29.00 Booyah!

    A water-based, biodegradable cleaner that removes deposits, scum lines and rust stains from hulls.  Safe on fiberglass, metal, wood and stainless steel.  Works on inflatable boats too. This stuff begins working on contact and the buffering process is safer than other acid based bottom cleaners.

  • Seapower Metal Polish (8oz)

    Seapower Metal Polish (8oz)


    $12.99
    x
    Seapower Metal Polish (8oz)

    Seapower Metal Polish (8oz)

    $12.99 Booyah!

    This stuff cleans severly stained, corroded or oxidized metals.  Use it on stainless steel, brass, chrome, copper, aluminum and magnesium.  Polishes and removes scratches from plastic, plexi-glass and Lexan.

  • Marine Tex (2oz, grey)

    Marine Tex (2oz, grey)


    $30.00
    x
    Marine Tex (2oz, grey)

    Marine Tex (2oz, grey)

    $30.00 Booyah!

    A high strength epoxy repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics.  Easy-to-apply paste makes permanent repairs to hulls, decks and equipment, including exhaust lines, outdrives, tanks, piping and stringers.  It gives enough time to do complex repaires.  Bonds dissimilar metals without galvanic corrosion.  Can be drilled or tapped and is paintable after cure.

  • Marine Tex (2oz, white)

    Marine Tex (2oz, white)


    $30.00
    x
    Marine Tex (2oz, white)

    Marine Tex (2oz, white)

    $30.00 Booyah!

    A high strength epoxy repair compound designed for filling, bonding and rebuilding wood, fiberglass, ceramic, glass, metal, masonry and many plastics.  Easy-to-apply paste makes permanent repairs to hulls, decks and equipment, including exhaust lines, outdrives, tanks, piping and stringers.  It gives enough time to do complex repaires.  Bonds dissimilar metals without galvanic corrosion.  Can be drilled or tapped and is paintable after cure.

  • McLube Sailkote (11oz)

    McLube Sailkote (11oz)


    $36.00
    x
    McLube Sailkote (11oz)

    McLube Sailkote (11oz)

    $36.00 Booyah!

    Dry lubricant in an aerosol can that is easy to apply.  Keeps sails, hulls, rigging, deck hardware and anything that moves on your boat running smoothly.  Formulated with Dupont Krytox.

  • McLube Sailkote (6oz)

    McLube Sailkote (6oz)


    $21.00
    x
    McLube Sailkote (6oz)

    McLube Sailkote (6oz)

    $21.00 Booyah!

    Dry lubricant in an aerosol can that is easy to apply.  Keeps sails, hulls, rigging, deck hardware and anything that moves on your boat running smoothly.  Formulated with Dupont Krytox.

  • Fiber Craft Fiberglass Cloth (6oz)

    Fiber Craft Fiberglass Cloth (6oz)


    $18.00
    x
    Fiber Craft Fiberglass Cloth (6oz)

    Fiber Craft Fiberglass Cloth (6oz)

    $18.00 Booyah!

    A medium weight (6oz per square foot) woven cloth.  Dimensions: 38" x 1 yard.

  • West System Biaxial Tape 727

    West System Biaxial Tape 727


    $22.00
    x

    West System Biaxial Tape 727

    $22.00 Booyah!

    Great for general repairs, tabbing and reinforcing.  The tape dimensions are 4" by 10' non-woven 17oz E glass fabric.  The two fabric layers are lightly stitched together at a 45 degree fiber angle orientation.  Being non-woven, the flat fibres reduce the amount of print-through and the end result is stiffer. 

  • West System Epoxy G/Flex (4oz)

    West System Epoxy G/Flex (4oz)


    $34.00
    x
    West System Epoxy G/Flex (4oz)

    West System Epoxy G/Flex (4oz)

    $34.00 Booyah!

    A toughened liquid epoxy for permanent waterproof binding of fiberglass, ceramics, metals, plastics, and damp and difficult-to-bond woods.  It's got a little more flex than standard epoxies but is much stiffer than adhesive sealants, so it makes great structural bonds that can absorb the stress of expansion/contraction and vibration. 

    You can use West System fillers and additives with it.  G/Flex gives you 45 minutes of working time at room temperature when mixed at a 1:1 ratio and reaches a full cure in 24 hours.

  • System 3 Cold Cure Epoxy (355ml kit)

    System 3 Cold Cure Epoxy (355ml kit)


    $45.00
    x
    System 3 Cold Cure Epoxy (355ml kit)

    System 3 Cold Cure Epoxy (355ml kit)

    Originally formulated to extend the number of months during which epoxy can be used effectively outdoors, this stuff works down to 1 degree Celcius in 100% humidity.  It's a 2:1 ratio which makes mixing easy. 

    Cold Cure is a 100% solids, unfilled, medium modulus, low viscosity, moisture tolerant epoxy system with no VOCs. It is non-shrinking, flexible and has excellent resistance to cracking, abrasion, common chemicals and fatigue. It is clear and is compatible with most paints and clear finishes. When cured it can be machined, drilled, sanded and tapped.

  • System 3 Cold Cure Epoxy (710ml kit)

    System 3 Cold Cure Epoxy (710ml kit)


    $69.00
    x
    System 3 Cold Cure Epoxy (710ml kit)

    System 3 Cold Cure Epoxy (710ml kit)

    Originally formulated to extend the number of months during which epoxy can be used effectively outdoors, this stuff works down to 1 degree Celcius in 100% humidity.  It's a 2:1 ratio which makes mixing easy. 

    Cold Cure is a 100% solids, unfilled, medium modulus, low viscosity, moisture tolerant epoxy system with no VOCs. It is non-shrinking, flexible and has excellent resistance to cracking, abrasion, common chemicals and fatigue. It is clear and is compatible with most paints and clear finishes. When cured it can be machined, drilled, sanded and tapped.

  • Sold Out
    West System Epoxy Resin 105 (1G)

    West System Epoxy Resin 105 (1G)


    $154.00
    x
    West System Epoxy Resin 105 (1G)

    West System Epoxy Resin 105 (1G)

    Sold Out
    $154.00

    West System's do-everything 2 part epoxy system is marine grade for excellent water repellancy and durability.  It bonds and coats fibreglass, wood, metal, fabrics, and other composite materials.

    The 105 resin is the base material you use to build whatever compound you want.  Used with West System hardener it cures within a large temperature range and doesn't shrink.  They don't use volatile solvents so this resin is safer to work with than polyester or vinylester resins and doesn't have a strong odour.  It works great as an adhesive and when you use filler in it you can shape/sand it after it has cured.  When applied with a roller it flows out into a thin smooth film without "fisheyeing".  Cures clear.

     

  • West System Epoxy Resin 105 (quart)

    West System Epoxy Resin 105 (quart)


    $62.00
    x
    West System Epoxy Resin 105 (quart)

    West System Epoxy Resin 105 (quart)

    West System's do-everything 2 part epoxy system is marine grade for excellent water repellancy and durability.  It bonds and coats fibreglass, wood, metal, fabrics, and other composite materials.

    The 105 resin is the base material you use to build whatever compound you want.  Used with West System hardener it cures within a large temperature range and doesn't shrink.  They don't use volatile solvents so this resin is safer to work with than polyester or vinylester resins and doesn't have a strong odour.  It works great as an adhesive and when you use filler in it you can shape/sand it after it has cured.  When applied with a roller it flows out into a thin smooth film without "fisheyeing".  Cures clear.

  • West System Filler Colloidal Silica 6 406

    West System Filler Colloidal Silica 6 406


    $40.00
    x
    West System Filler Colloidal Silica 6 406

    West System Filler Colloidal Silica 6 406

    $40.00 Booyah!

    Great for general bonding and West System's most versatile filler, 406 is a thickening additive that keeps your epoxy from dribbling down off vertical joints.  It creates a smooth mixture and dries to an off-white colour.  Being an adhesive filler, it is difficult to sand after curing and is used mainly for bonding rather than cosmetic purposes.  People often use other fillers in combination with this one; it's good for toughening up fairing compounds. 

  • West System Filler Filleting 405 (8oz)

    West System Filler Filleting 405 (8oz)


    $27.00
    x
    West System Filler Filleting 405 (8oz)

    West System Filler Filleting 405 (8oz)

    $27.00 Booyah!

    Perfect additive to your epoxy for use in glue joints and fillets on natural wood.  It creates fillets that are smooth and don't need much sanding.  It's strong and durable, and the colour is brown.  You can use it to alter the shade of other West System fillers.

  • West System Filler High Density 404 (15oz)

    West System Filler High Density 404 (15oz)


    $22.00
    x
    West System Filler High Density 404 (15oz)

    West System Filler High Density 404 (15oz)

    $22.00 Booyah!

    404 is a thickening additive that gives maximum strength.  Generally you use higher density fillers when working with higher density materials like metal or hardwood.  You can add 404 to your epoxy when you want to fillet or fill gaps and need a really durable bond.  Dries to an off-white colour.

About Eb's

Let Eb’s Source For Adventure be your destination to equip your next outdoor adventure. We’ve got the gear for your adventure, be it sailing, canoeing/kayaking, hiking, cross country skiing, or snowshoeing. And we’ve got the expertise to make sure you are well equipped, since we are adventure enthusiasts ourselves.